Tired of your Shark vacuum falling over? Learn how to securely install the Rocket wall mount, find the best mounting height, and organize your attachments.
Stick vacuums are notoriously “top-heavy.” Because the motor and dust bin are at the handle, leaning a Shark Rocket against a sofa or wall usually results in it crashing to the floor. This can crack the plastic motor pod or shatter the headlights.
Tired of your Shark vacuum falling over? Learn how to securely install the Rocket wall mount, find the best mounting height, and organize your attachments.
- Symptoms: Vacuum constantly falls and damages walls, Charging cord is a tripping hazard, Nowhere to store the long wand and floor nozzle, Wand is scratching the floor when leaned against the wall
- Tools: Drill, 1/4-inch Bit, Level, Phillips Head Screwdriver
- Difficulty: Medium
The official Shark wall mount is the only way to store these machines safely. Here is how to install it correctly the first time.
1. Choosing the Right Height
The most common mistake is mounting the bracket too high.
- The Rule: The “Storage Hook” on the vacuum is designed so the floor nozzle sits flat on the ground while the top is secured. This takes the weight off the wall screws.
- How to Measure: Stand the vacuum upright in its fully assembled state. Mark the wall exactly where the hook on the back of the handle hits. This is where your bracket should go.
2. Finding a Stud vs. Drywall Anchors
A Shark Rocket weighs about 8 lbs, but the force of pulling it off the wall daily adds significant stress.
- Stud Mounting: If possible, screw the mount directly into a wooden wall stud for maximum security.
- Drywall Anchors: If a stud isn’t available, do not use the cheap plastic anchors that come in the box. Use “Toggle Bolts” or “Self-Drilling Zinc Anchors” rated for at least 50 lbs. This prevents the mount from wiggling loose over time.
3. Cord Management (Corded Rocket)
If you have a corded model (HV300/322), the 30-foot cord can be a nightmare.
- The Pro Tip: Install the wall mount near an outlet. Use a small adhesive “Command Hook” 12 inches below the mount to catch the first loop of the cord. This prevents the heavy cord from pulling down on the vacuum and potentially unseating it from the wall bracket.
4. Alternate “No-Drill” Storage
If you live in an apartment and cannot drill into the walls, Shark has a secret storage mode.
- The MultiFlex Fold: On Vertex and MultiFlex models, fold the wand 180 degrees. The motor pod will now sit directly over the floor nozzle, creating a stable, self-standing unit that fits inside any standard closet.
Storage Safety Checklist
| Feature | Checkpoint | Why |
|---|---|---|
| Nozzle Position | Must touch the floor | Prevents bracket failure |
| Outlet Proximity | Within 3 feet | Easy charging/plugging |
| Attachment Clips | Securely snapped | Prevents lost tools |
| Child/Pet Height | Out of reach | Heavy motor is at the top |
TIP: If you find the official bracket too small, many owners use a “Heavy Duty Tool Hook” from a hardware store (like Home Depot). These rubber-coated hooks are often stronger and cheaper than the plastic OEM Shark replacements.